Thanks for the heads up and info where to put the options.xml file! I removed -d, and started trying, so I noticed it got my requests on port 8123 and just tried again. Step: sudo docker run name home-assistant restart=always net=host privileged -itd -v /volume1/Shared/docker/homeassistant/config:/config device /dev/ttyUSB0 -v /dev/bus/usb:/dev/bus/usb homeassistant/home-assistant Im really liking this whole container thing. That's what I run and have no issues. If I plug the Z-Stick into the front USB3 slot it is showing up as dev/ttyACM0, but if I use either of the two USB2 slots on the rear I cant see it. If i restart hass it wont come up and if i then restart the docker Container, all is good again for 24h. Does the Trdfri Gateway require a USB port? I get this error message, and I have checked the Shared Folder permissions, which seem OK. Any idea why this wont work? sudo docker run name home-assistant restart=always net=host privileged -itd -v /volume1/docker/homeassistant:/config device /dev/ttyACM0 -v homeassistant/home-assistant. https://community.home-assistant.io/t/setting-up-mysql-on-a-synology-nas-docker-container/16253. Wonder if theres a cache issue? I then tried upgrading the firmware of the z-stick. I must stress though this instance doesnt do much at all. Follow the instructions in the image below. Well need this for network discovery to work. Would I have to create that folder manually first? This should allow the UI to see the files. I then set up my second container following this guide and renamed the old one (originally created via GUI) to home-assistant-old. 2 days later, theres another update, so I renamed the one made two days ago to home-assistant-old2. Now my GUI only shows home-assistant-old2 and home-assistant-old, but it does not show the latest one I just setup today with the latest build. Ive tried your suggestions, but without success. I did manage to upgrade Home Assistant all through the DSM Docker GUI (after initial setup following your guide above). If you have two or more NICs with different IP addresses from the same subnet and SSDP is activated, this leads to problems with this integration, as the NAS is detected several times with different IPs and the integration always adopts the new detected IP address in its configuration and then reloads it. (And now on to the next docker image still a long way to go). In this case, it is recommended to use NIC bonding instead or to deactivate SSDP. It seems like whenever an invalid key is tried, the lock will refuse to work again with the controller for security reasons? Hi Tried the command, and this is what I got: docker rmi homeassistant/home-assistant:latest No need. After that, well want to put all the files from inside the shared folder back into the original location, so well use. A friend of mine has it working but I keep getting, mosquitto_1 | WARNING: no logs are available with the db log driver This tutorial looks at how to install Home Assistant (Supervised) on a Synology NAS! Home Assistant Download: https://www.home-assistant.io/installation/alternative Written Instructions: https://www.wundertech.net/how-to-set-up-home-assistant-supervised-on-a-synology-nas Subscribe for more tech related tutorials and overviews: https://link.wundertech.net/ssYt Product Recommendations: https://link.wundertech.net/rmYt Check out our website: https://link.wundertech.net/wtYtDISCLAIMER: The information in this video has been self-taught through years of technical tinkering. Ive chosen here to place it in a folder called Shared, which I can access from my local network easily. . I wonder if it is a feature of DSM to not show it. Ive used the commands shown in above instructions to install HA in docker with Z-Wave. In my experience, when the z-wave issue would occur, I had no trouble still accessing the Z-wave USB by its path. 2. This also resolves the issue of non starting Z wave at startup at my Strange that others wont let you download it. Using any other account (even the admin account) just wont work. Home Assistant (HA) is a free, open-source home automation software that helps you build a localized smart home with complete privacy. Code owner commands. You will be able to see them in the Docker UI of Synology. For everyone who is interested in running a Home-assistant in docker with SSL this solution worked for me at a DS 1515+. Active/back-upmodus Add-ons for Home Assistant are freely available in the add-on store. Ive just checked my DSM (which is DSM5) to see what containers mine displays.but it wont load for me (might be because Im accessing it remotely). 1) Create a script which will try to detect when z-wave is down. If youve used a flag like net=host or something (which isnt supported by the UI) then DSM may hide it from the UI so you dont break the container. Thats what I thought. Once you have done that, re-create the Shared folder in the Synology UI. So, if the issue is making the USB port accessible to the Docker container via a command line adjustment, I dont know where that would go. Note: If you want to run the Home Assistant container over HTTPS check How to Run Docker Containers Over HTTPS. Unraid has its own community 'app' store of docker images like the synology docker registry, supports GPU passthrough for use in plex for transcoding or object vision :-) 2 yr. ago I was able to create the folder volume1dockerhomeassistantconfig and use that. Select Settings in the bottom left. If you dont see any folders like Shared etc, then you might want to create a new Shared folder from the Synology UI. I succeded to install HA in my DS216+II. Strange. 2) I have a few docker containers that need to restart for various reasons. The only difference I am aware of is how you access root as explained above. Whatever you choose to use, the folder must exist before you will be able to start Home Assistant. Although now on the 13th try or so, it worked. Enable Advanced Mode in the account options. Then its a simple Settings->Import on Container screen. 3) Nope, still no clue on that one. Home Assistant will automatically find devices on your local network. FATA[0000] Error: failed to remove one or more images, Damn, so I guess its not a cache issue then. ssl_key: /certificate/_archive/fyjQFl/privkey.pem. Thanks! docker: Error response from daemon: all SubConns are in TransientFailure, latest connection error: connection error: desc = transport: Error while dialing dial unix /var/run/docker/containerd/containerd.sock: connect: connection refused: unavailable. I guess I can run the rpi version inside docker.. but is that any better or worse? Follow the instructions below: General: In the Task field type in Install Home Assistant.Uncheck "Enabled" option. Once the device got detected, it works like charm as you have already explained. In a nutshell, well be using Docker to create a virtual machine (called a container). I think this still wont allow for hibernation to happen because the container itself is still running on Volume1. I can remember the name of it, and think you might have to side load it. It seems the USB path is not persistent after stopping and starting HA, after a restart of the container, HA cannot find the Config path. Im very new to HA / Docker. The vera has support for a lot more devices than openzwave, which is a bonus. I had to remove node and add secure node again. Disabling the OpenVPN connection, then starting Docker should fix this. I cannot access this path by Synology File Station. homeassistant/home-assistant Finally this tells Docker which container to lookup on DockerHub. Follow the instructions in the images below. I can create rather complex automations in the Home app, and even more complicated ones in the Elgato Eve app, that integrates with Home. Read how to solve 400: Bad Request error. Thats quite strange. mount_point : /config, This is also available from the DockerHub. Reading this one in particular helped me to move my HA from a Pi 3 to my xpenology (a Dell T20 running Synology Is). They shouldnt change too much on a NAS,as the system should be on almost permanently. Just tried them on DS Note: How to Clean Docker Automatically. Interesting. 716+II with DSM 6.1.4. Not that Im aware of. I have my MySQL container always up, it never gets rebooted. Something to look into I guess! However it looks like someone has created a Docker container which will run this configurator. Note: Best Practices When Using Docker and DDNS. Advertising:Certain offers on this page may promote our affiliates, which means WunderTech earns a commission of sale if you purchase products or services through some of our links provided. Ill look into converting to the MySQL database in its own container. I have HA installed, just want Lovelace gui, Youll need to access the Lovelace UI from the info panel (just as you would any other platform), until Lovelace becomes default in a future version. Def have to spend more than a week down here! By doing this, the user will not be able to login to the web interface or view any of the files on the Synology NAS. Hmm I havent tried this, but I cant see why it wouldnt work. Entities reporting the current and combined memory and swap utilization of the NAS. Could be a ownership permissions issue. Such a pain! script (@ /usr/local/etc/rc.d/startup.sh) which includes above commands. Before I stumbled upon your guide (which is awesome, btw), I set up the first container via the GUI. You should be familiar with logging into and using SSH. Instead, you should login using your admin username and password. (homes contains user folders). /volume1/docker/mosquitto/data:/mosquitto/data Entities reporting the internal temperature, status (as shown in Synology DSM) and SMART status for each drive inside the NAS. Please, could you write correct command for my situation. After going through the update process, it appears the new container is whats not showing up. Unfortunately Ive also experienced this on my Synology. Home Assistant Supervised as a (Debian) VM. Did you have any issue with high memory usage on the Synology NAS docker container? 2) Do you perform backups of your installations and, if so, how? Leave the storage as default and then select Next. As noted above, you do not need access to the DSM and Home Assistant will still be able to read statistics from your NAS. No I havent setup SSL just yet. I cant see any new devices appearing under /dev when I plug the Aeotec Z-Stick in. You may need to prefix the command with sudo, so. I tried a png and a jpg file neighter one of them are showing up. I dont know if this will help, but at least its something for you to try. 7. In this guide, I'm going to show you how to install it using Docker on a Synology NAS, with full compatibility with z-wave and network discovery. Again, this is a vm on your Synology. From my (limited) knowledge of HomeKit, there are no smarts behind HomeKit. Click OK. After you click OK onSTEP 6, select your Install Home Assistant Task then click the Run tab. It will depend on your Internet speed connection. { Select your Virtual Machine Manager storage, then select Next. Should these groups be visible when logged in to the NAS or are they set up within the Docker container somehow? From the list, search and select Synology DSM. Oh, that makes sense! Good point about the path needing to exist! I get the error Start container home-assistant failed: {message:Bind mount failed: /volume1/Shared/docker/homeassistant/config does not exists}. Firstly sorry for posting to such an old post but this is linked to from the Home Assistent/Synology installer so others will likely see this here also. volume_bindings : [ mkdir: cannot create directory /volume1/Shared: Permission denied Personally I run Home Assistant OS but am experimenting with moving that to HA Supervised. Heres my run command. The HA help says the Z-Stick should have group of dialout and rw permission. By default, only the User sensor is enabled. The one that sticks out to me is, If you are on Windows and youre using Python 3.5, download the Netifaces dependency, Home Assistant recently upgraded the Docker images to Python 3.6. Just be sure to use that in your Home Assistant config file when telling Home Assistant where your USB path is. After a week or so of usage, my SQL database was easily over 400mb in size, which meant restarting and running hass was slow, because it had to maintain this huge database file. My trip into Z-Wave was triggered by a project to control a sun screen, for which no HomeKit solutions exist. Clear Current Container Container > select container > Action > Clear I have been able to configure several other components with HA, but cant seem to get this one working. Are you looking at the images, or containers? First, lets try make the owner of those files and folders the admin user and group. WunderTech is a trade name of WunderTech, LLC. This will allow Sonos, Hue, Plex etc to be discovered on the network automatically. At the end of the script, the start command is a systemctl command that fires up something called hassio-supervisor.service. STEP 3 Go to File Station and open the docker folder. When the Home Assistant machine/container boots up, it will have a USB device available at /dev/ttyUSB0. I have run a port scan that says that confirms that 8123 is open. Hopefully its still the same in the latest versions. Any suggestions? I originally thought it was faulty, so I did a hard reset of the z-stick. Since posting this, I havent seen the z-wave radio issues on reboot as I described. I also have a Synology NAS that I would like to be able to . However, changing ports is worth a try! Interesting. 2. I just took a look at my instance of HASS running on my Synology, and memory is at 0% CPU between 1% and 3%. Does that alter the command line for launching the Docker container at all if the new locations are: The file will now upload to your Synology NAS. Select Import from OVA files, then select Next. This tutorial looked at how to set up Home Assistant Supervised on a Synology NAS. Once everything has been installed (it could take some time the first go around), you should be able to access Home Assistant at the IP address of your NAS. I dont have any issues with speed as its WAY faster than my RPi3 was. Im considering starting completely fresh by deleting all instances (and docker) and starting over. Still didnt help. Go to Config to switch on Open vSwitch automatically. That is a strange one. The Home Assistant Supervisor will allow you to install a bunch of add-ons that will enable you to configure your Home Assistant install quickly and easily. Hmm well how are your Z-wave devices connected to HomeKit? Error response from daemon: No such image: homeassistant/home-assistant:latest 12. Once logged in, use the following command to switch to the root user using the command If you want to use the same folder as I did above, you can create it by running You can set up Home Assistant on a Synology NAS relatively easily in Docker, however, there are a bunch of benefits to installing the supervised version. Any creative ideas on how to automate this? If an instance was found, it will be shown as "Discovered", which you can select to set it up right away.